ROUND STRAIGHT HINGED ALUMINUM POLES
The shaft for our round straight hinged aluminum poles is extruded from all new 6063 alloy aluminum tubing and heat treated to produce a T6 temper. These standards may be drilled to accept side arm mounted luminaires. Mounting orientation must be provided. An aluminum tenon may also be supplied as standard.
Hinged Base Coating
Cast from A356 alloy aluminum, the anchor base is heat treated to produce a T6 condition and inserted into the anchor base casting. The two pieces are joined by a continuous circumferential weld at the outside top and inside bottom of the anchor base. The base has a hinge pin to allow lowering of the pole to maintain luminaires.
EPA ratings include a 1.3 gust factor.
Anchor bolts should be set using factory-supplied anchor bolt templates.
Click the links below to view the cut-sheets for the individual design.