ROUND TAPERED STEEL POLES
Pole Shaft Specifications
The pole shaft for our round tapered steel poles are fabricated from a weldable-grade, hot-rolled commercial quality carbon steel ASTM A-595 Grade A with a guaranteed minimum yield strength of 55,000 psi after fabrication. It is a one- or two-piece* construction with a full-length, longitudinal weld. The pole tapers at a rate of 0.14″ per foot.
Base Plate Cover
A full base plate cover is supplied. For 20-35′ poles, the base cover is automotive structural grade ABS plastic with a UV inhibitor to eliminate color fading. It is rust proof and tamper resistant. For 39-60′ poles, the base cover is made of two-piece formed sheet steel.
*Poles greater than 39′ are of two-piece, slipfit construction.
**We reserve the right to use a pole-top adaptor for direct mounting of fixtures, as deemed necessary.
EPA ratings include a 1.3 gust factor.
Anchor bolts should be set using factory-supplied anchor bolt templates.
Vibration dampeners are suggested for poles 25′ and longer.
Click the links below to view the cut-sheets for the individual design.