Photo of Parking Lot Lighting


Pole Shaft Specifications

The pole shaft for our square tapered steel poles are fabricated from United States coil stock. It is a weldable-grade, hot-rolled commercial quality carbon steel ASTM A-595 Grade A with a guaranteed minimum yield strength of 55,000 psi after fabrication. It is a one-piece construction with a full-length, longitudinal, high-frequency resistance weld and is square in cross section, having a uniform taper of approximately 0.10″ per foot in length.

Base Plate Cover

A full base plate cover is supplied. For 25′ and 30′ poles, the base cover is steel. For 20′, 25′, and 39′ poles, the base cover is made of two-piece formed sheet steel.

EPA ratings include a 1.3 gust factor.
Anchor bolts should be set using factory-supplied anchor bolt templates.
Vibration dampeners are suggested for poles 25′ and longer.


Click the links below to view the cut-sheets for the individual design.